When the model is solved there are results spreadsheets .
The Wall Force Results spreadsheet lists the axial force, shear and moments for each wall panel. The elevations where forces are reported are at the base of walls and at the locations of any diaphragms that intersect the walls. The elevation is given in terms of global elevation.
The Wall Label column displays the wall panel label.
The LC column reports the relevant Load Combination.
The Elevation column reports the elevation (in Global Coordinates) at which the forces are reported.
The Axial value reports the axial force in the wall. Compression force is reported as positive, Tension force as negative.
The x-Shear value is the shear force in the local x direction for the wall. This is the shear wall / strong direction of the wall.
The z-z Moment value is the moment about the local z axis for the wall. This is the shear wall / strong direction of the wall.
The general wall detail report shows the material type, height, length, and envelope forces for general walls.
Note
The Wall Panel Results Spreadsheet displays the calculated results for wall elements
and may be accessed by selecting Wall Panel Design from the Results menu .
The spreadsheet has
The first tab as well as the last tab give
The next
The next three tabs are results of Wood Wall analysis. For more information on these tabs see Wood Wall Results.